MH-MDF300
MINGHUNG
846596
MDF
Medium density fiberboard
MDF (Medium Density Fiberboard) is a man-made board /artifical board made from wood fibers (such as wood leftovers, sawdust, etc.) mixed with synthetic resins (such as urea formaldehyde or phenolic resin), which is made by hot pressing at high temperature and pressure
Features of MDF:
1. Moderate density: The density is usually between 600-800 kg/m³, between high density board (HDF) and low density board (LDF).
2. Smooth surface: The surface is smooth and fine, suitable for direct coating, painting or laminating.
3. Good processing performance: Easy to cut, drill, carve and mill, suitable for making furniture and decorations with complex shapes.
4. High stability: not easy to deformation, cracking, with good dimensional stability.
5. Environmental protection: Use wood residues as raw materials to reduce resource waste, and some products meet environmental standards (such as E1, E0).
Do you know how to produce MDF/HDF? and what is the Production step of MDF production? The mainly production step mainly includes: Raw materials, Fiber production, Drying, Gluing, Forming, Pre-press, Hot press, Edge cutting, Sanding
Now let us see each production step one by one
Raw Materials:
Use wood based product wastes (such as sawdust, wood chips, shavings, etc.) as raw materials.
Raw materials are cleaned and screened to remove impurities
Defibration:
The raw wood is separated into fibers by a hot mill /defibrator
Synthetic resins (such as urea-formaldehyde resins) are added as adhesives during fiber separation.
Screening:
Vibrating screen is used for screening and grading shavings to ensure the dimensional uniformity of shavings, thereby improving the quality of the particleboard
Drying:
The fiber is sent to the dryer to remove excess water, so that its moisture content is controlled at 8%-12%. The dryer can be different length and diameter as your production capacity
Resin gluing:
Evenly applying the glue on wood shavings and fibers
Forming:
The dried fibers are evenly paved into slabs by the laying machine. Control the distribution and thickness of fibers during paving
Pre-press:
The paved slab is sent to the prepress for preliminary compression to make it preliminary formed
Hot press:
The prepressed slab is sent to a multi-layer hot press and hot-pressed under high temperature (180-200°C) and high pressure (20-30MPa). The hot pressing time is usually 2-10 minutes, the specific time is adjusted according to the thickness of the plate
Edge cutting:
The hot pressed sheet is cooled to bring its temperature down to room temperature. The edger cuts the sheet to standard size
Sanding:
Sanding machine is used to sand the surface of the MDF panel to make its surface smooth and flat.
Quality inspection and packaging:
Quality inspection of finished products, including thickness, density, strength, moisture content and other indicators.
Packaging, storage or delivery of qualified products
Unil now we have deliverd many MDF making machines to different countries and got good feedback. We insist offer the suitable and good MDF machine and other wood based panel machine to every our customers.
1. We can help you design your Plant layout and planning
2. We can offer installation service
3. We have strict quality detection process during your machine production, ensure machine good quality
4. Offer life-span service anytime when you meet problem
We are China Factory/Manufacturer/Supplier of Wood based panel machine, we mainly have two factory, one focus on MDF production line /OSB production line /Chipboard production line; Another focus on Plywood production line and veneer machines.
With many years production experience, equipped with high technology lathes, with experienced workers and engineers team, we can design and offer the suitable and good wood based panel machinery for you.
A:For the Full production line, we will deliver to you in every three months
A:T/T, 30% as deposit, the left payment before loading; OR 30% as deposit, the left by L/C
A: Yes, we can send our engineers to your factory install machine
MDF
Medium density fiberboard
MDF (Medium Density Fiberboard) is a man-made board /artifical board made from wood fibers (such as wood leftovers, sawdust, etc.) mixed with synthetic resins (such as urea formaldehyde or phenolic resin), which is made by hot pressing at high temperature and pressure
Features of MDF:
1. Moderate density: The density is usually between 600-800 kg/m³, between high density board (HDF) and low density board (LDF).
2. Smooth surface: The surface is smooth and fine, suitable for direct coating, painting or laminating.
3. Good processing performance: Easy to cut, drill, carve and mill, suitable for making furniture and decorations with complex shapes.
4. High stability: not easy to deformation, cracking, with good dimensional stability.
5. Environmental protection: Use wood residues as raw materials to reduce resource waste, and some products meet environmental standards (such as E1, E0).
Do you know how to produce MDF/HDF? and what is the Production step of MDF production? The mainly production step mainly includes: Raw materials, Fiber production, Drying, Gluing, Forming, Pre-press, Hot press, Edge cutting, Sanding
Now let us see each production step one by one
Raw Materials:
Use wood based product wastes (such as sawdust, wood chips, shavings, etc.) as raw materials.
Raw materials are cleaned and screened to remove impurities
Defibration:
The raw wood is separated into fibers by a hot mill /defibrator
Synthetic resins (such as urea-formaldehyde resins) are added as adhesives during fiber separation.
Screening:
Vibrating screen is used for screening and grading shavings to ensure the dimensional uniformity of shavings, thereby improving the quality of the particleboard
Drying:
The fiber is sent to the dryer to remove excess water, so that its moisture content is controlled at 8%-12%. The dryer can be different length and diameter as your production capacity
Resin gluing:
Evenly applying the glue on wood shavings and fibers
Forming:
The dried fibers are evenly paved into slabs by the laying machine. Control the distribution and thickness of fibers during paving
Pre-press:
The paved slab is sent to the prepress for preliminary compression to make it preliminary formed
Hot press:
The prepressed slab is sent to a multi-layer hot press and hot-pressed under high temperature (180-200°C) and high pressure (20-30MPa). The hot pressing time is usually 2-10 minutes, the specific time is adjusted according to the thickness of the plate
Edge cutting:
The hot pressed sheet is cooled to bring its temperature down to room temperature. The edger cuts the sheet to standard size
Sanding:
Sanding machine is used to sand the surface of the MDF panel to make its surface smooth and flat.
Quality inspection and packaging:
Quality inspection of finished products, including thickness, density, strength, moisture content and other indicators.
Packaging, storage or delivery of qualified products
Unil now we have deliverd many MDF making machines to different countries and got good feedback. We insist offer the suitable and good MDF machine and other wood based panel machine to every our customers.
1. We can help you design your Plant layout and planning
2. We can offer installation service
3. We have strict quality detection process during your machine production, ensure machine good quality
4. Offer life-span service anytime when you meet problem
We are China Factory/Manufacturer/Supplier of Wood based panel machine, we mainly have two factory, one focus on MDF production line /OSB production line /Chipboard production line; Another focus on Plywood production line and veneer machines.
With many years production experience, equipped with high technology lathes, with experienced workers and engineers team, we can design and offer the suitable and good wood based panel machinery for you.
A:For the Full production line, we will deliver to you in every three months
A:T/T, 30% as deposit, the left payment before loading; OR 30% as deposit, the left by L/C
A: Yes, we can send our engineers to your factory install machine
