MH-HP24
MINGHUNG
847930
Do you know what is the Multi-daylights hot press? what is the function of Hot press?
| 1 | Multi-Daylights Hot press Introduction |
It is the core equipment in the production of particleboard, which is used to glue and cure the particleboard after prepressing the pavement under high temperature and high pressure to form the finished board with high strength. It is characterized by the best multi-layer design, can press multiple slabs at the same time, high production efficiency, suitable for large-scale particle board production line Multi-daylights hot press can be different opening as capacity and requires, and except for standard panel size 1220*2440mm, it also can be designed as requires Usually the Hot press equipped with Auto feeder and unfeeder to reach auto loading and unloading wood panel, save labor cost and high work efficiency |
| 2 | Basic structure and Work principle of Hot press |
| Whatever the hot press to be different layers and size, its structure are similar |
| Parts | Function explain |
| Hot platens | Multi layers (usually 8-24 layers or more, inside with thermal oil or steam. offer heating energy 180-220℃) |
| Hydraulic system | High pressure oil cylinders (Pressure 15-35Mpa) Driving pressure close |
| Press frame | Heavy steel frame structure, to undertake high pressure, keep hot press stable |
| Loading Unloading system | With Auto feeder and unfeeder, no need workers |
| Control system | PLC automatic control temperaature, pressure, time |
| 3 | Classification and Features |
| As the heating method, press layers, automation degree, and other factors, it can be show as below |
| Type | Feature | Application |
| Oil heating | The temperature control is accurate (±1℃), suitable for high-precision production, but the system is complex | High-end particle board, moisture-proof board |
| Steam heating | The cost is low, but the temperature fluctuation is large (±5℃) | Ordinary particle board, economic production line |
| Electricity heating | Fast heating, high energy consumption, only used for experiments or small equipment | Laboratory, special plate test |
| 3 | As Hot press layers |
| Hot press can be different layers, like 8-24 layers, some clients required more like 30 layers, 35 layers, different layers, the production capacity will be different |
| Feature | Capacity | |
| 8-12 layers | Middle and small production line, high flexible, suitable for different panel thickness | 100-300m3/day |
| 16-24 layers | High production capacity, high efficiency | 500-1000m3/day |
| 4 | Mainly parameters of Hot press |
| To keep the hot press works well, it is big related with the mainly parts and parameters |
| Parameter | Range | Influence |
| Heating temperature | 180-220 ℃ | Temperature lower → The adhesive is not totally cured Temerparture Higher →Lamination or carbonization of plates |
| Unit pressure | 2.5-5Mpa | Insufficienct pressure → Panel loose Higher pressure → Overcompression and unevenly density |
| Press time | 3-8mins | Depends on the panel thickness |
| Panel thickness | 6-40mm | When thickness thicker, the hold pressure time need be longer |
| 5 | Application of Hot press |
- Ordinary particle board : Furniture substrate, Packing and so on - Moisture resistance particle board: Kitchen, Bathroom cabinet - Fine proof particle board: Public decoration - Low density particle board: Partition, Ceiling |
Now except Multi-opening hot press, there is one High technology Continuous press for big production capacity.
Whatever which hot press type you need, our factory can offer you
Welcome contact us for more information
Do you know what is the Multi-daylights hot press? what is the function of Hot press?
| 1 | Multi-Daylights Hot press Introduction |
It is the core equipment in the production of particleboard, which is used to glue and cure the particleboard after prepressing the pavement under high temperature and high pressure to form the finished board with high strength. It is characterized by the best multi-layer design, can press multiple slabs at the same time, high production efficiency, suitable for large-scale particle board production line Multi-daylights hot press can be different opening as capacity and requires, and except for standard panel size 1220*2440mm, it also can be designed as requires Usually the Hot press equipped with Auto feeder and unfeeder to reach auto loading and unloading wood panel, save labor cost and high work efficiency |
| 2 | Basic structure and Work principle of Hot press |
| Whatever the hot press to be different layers and size, its structure are similar |
| Parts | Function explain |
| Hot platens | Multi layers (usually 8-24 layers or more, inside with thermal oil or steam. offer heating energy 180-220℃) |
| Hydraulic system | High pressure oil cylinders (Pressure 15-35Mpa) Driving pressure close |
| Press frame | Heavy steel frame structure, to undertake high pressure, keep hot press stable |
| Loading Unloading system | With Auto feeder and unfeeder, no need workers |
| Control system | PLC automatic control temperaature, pressure, time |
| 3 | Classification and Features |
| As the heating method, press layers, automation degree, and other factors, it can be show as below |
| Type | Feature | Application |
| Oil heating | The temperature control is accurate (±1℃), suitable for high-precision production, but the system is complex | High-end particle board, moisture-proof board |
| Steam heating | The cost is low, but the temperature fluctuation is large (±5℃) | Ordinary particle board, economic production line |
| Electricity heating | Fast heating, high energy consumption, only used for experiments or small equipment | Laboratory, special plate test |
| 3 | As Hot press layers |
| Hot press can be different layers, like 8-24 layers, some clients required more like 30 layers, 35 layers, different layers, the production capacity will be different |
| Feature | Capacity | |
| 8-12 layers | Middle and small production line, high flexible, suitable for different panel thickness | 100-300m3/day |
| 16-24 layers | High production capacity, high efficiency | 500-1000m3/day |
| 4 | Mainly parameters of Hot press |
| To keep the hot press works well, it is big related with the mainly parts and parameters |
| Parameter | Range | Influence |
| Heating temperature | 180-220 ℃ | Temperature lower → The adhesive is not totally cured Temerparture Higher →Lamination or carbonization of plates |
| Unit pressure | 2.5-5Mpa | Insufficienct pressure → Panel loose Higher pressure → Overcompression and unevenly density |
| Press time | 3-8mins | Depends on the panel thickness |
| Panel thickness | 6-40mm | When thickness thicker, the hold pressure time need be longer |
| 5 | Application of Hot press |
- Ordinary particle board : Furniture substrate, Packing and so on - Moisture resistance particle board: Kitchen, Bathroom cabinet - Fine proof particle board: Public decoration - Low density particle board: Partition, Ceiling |
Now except Multi-opening hot press, there is one High technology Continuous press for big production capacity.
Whatever which hot press type you need, our factory can offer you
Welcome contact us for more information
