With the decline of the overall level of forests in the world and the improvement of wood-based panel production technology, the production of rice husk wood-based panel has appeared and developed well. Wood-based panel products are far from meeting the market demand and the production cost is high, and the use of rice husk as the raw material for the production of particleboard can not only meet the market demand, but also protect forest resources
Rice husk
It's an agricultural waste, rich in cellulose and silica, it can be specially treated and usually mixed with other wood raw materials to make particle board
 | Rice Husk Particle board production process |
Particle board
Particle board is a widely used wood based panel production, it is made by wood raw materials and wood waste materials and through apply glue and heating by press. It also can be laminating melamine on its surface to make decoration. and Particle board is Low cost, easy processing, good stability (not easy to crack deformation)
The whole production process mainly include: Raw materials → Wood chipper → Screening → Drying → Glue → Forming → Pre-press → Hot press → Cooling → Edge cutting → Sanding -→ Packing.
How each particle board production step works? let us see one by one
- Wood Chipper
For crushing wheat straw and wood based panel waste or wood to be wood chips. Its capacity can be different, such as 5-13ton/h
- Vibrating Screen
For screening different size of wood chips, and filter the unqualified wood chips. the widely used screen has rectilinear vibration, Circular vibration, elliptical vibration
- Rotary Drying
For drying wood chips, sawdust, wood flakes, biomass and others, it is a high efficiency, continuous dryer, Through rotate and how wind convection, drying the wood chips moisture.
- Glue applying
It is used to evenly spray adhesives (such as urea formaldehyde resin, phenolic resin, etc.) onto the surface of shavings or wood chips to ensure that the adhesive material is fully mixed with wood particles to improve the bonding strength and stability of the board
- Slab Forming
For forming glued materials to be required thickness and density panel
- Continuous Multi-rollers Pre-press
For pre-pressing the loosen slab to be preliminary forming
- Multi-Daylights Hot Press
For Pressing the slab to be solid and strong
- Post treatment and Surface polishing
For cutting particle board edges and calibrating its thickness and polishing its surface, improve particle board quality
- Heating Center
For offer heating energy to particle board machines such as hot press, rotary dryer
With above mainly machines, you can make particle board by wheat straw and other wood based materials.
Machine can make different particle board size, thickness as your requires
If you are interested, welcome contact us
